METROLOGY
5500 SERIES DIFFERENTIAL PRESSURE BALANCE
Static pressure range to 100 MPa (15,000 psi)
Differential pressure range to 95 MPa (13,800 psi)
Uncertainty on differential pressure to 0.005% rdg
Floating times exceeding 20 minutes up to maximum pressure
Sensitivity below 1 ppm
Operation in gauge mode possible
5300 SERIES HYDRAULIC REFERENCE STANDARDS
13 interchangeable pressure ranges from 0.02-4 MPa (3-580 psi) to 1-500 MPa (150-72,500 psi)
Total uncertainty on pressure to 10 ppm of reading with k=2
Full tungsten carbide Piston construction and geometry within 0.1m
Sensitivity better than 1 ppm
Floating times exceeding 20 minutes at all pressures
5200 SERIES PNEUMATIC REFERENCE STANDARDS
13 interchangeable pressure ranges from 0.02-4 MPa (3-580 psi) to 5-100 MPa (725-14,500 psi)
Total uncertainty on pressure to 10 ppm of reading with k=2
Full tungsten carbide Piston construction and geometry within 0.1µm
Sensitivity better than 1 ppm
Floating times exceeding 20 minutes at all pressures
PRESSURE BALANCE
Model CPB-5800
Primary standard for defining the pressure scale in a rand up to 1,400 bar hydraulic.
tatal measurement uncertainty to 0.006% of measured value.
Dual-rang piston-cylinder system with fully automated changing between ranges.
Factory calibration includes traceablility to national standards, as standard; with UKAS or DKD/DAkkS calibration possible as an option
High long-term stability with recommended recalibration cycle every five years.
Fast and safe replacement of the piston-cylinder system via patented ConTect quick-release system as an option.
Model CPB-3800
Total measurement uncertainly to 0.025% of measured value.
Factory calibration includes traceability to national standards as standard; with UKAS or DKD/DAkkS calibrations possible as an option.
High long-term stability with recommended recalibration cycle every five years.
Masses manufactured from stainless steel, can be adjusted to local gravity.
Compact dimensions.
HYDRAULIC DEAD WEIGHT TESTER
Model 580L/580M
Range bar(Kg/cm2) : 1-120/2-300
Kpa : 100-12,000/200-30,000
Psi : 10-1,600/30-4,000
Standard accuracy : 0.015% rdg
Class A accuracy : 0.006% rdg
Piston unit : Single range
Piston cylinder : Tungsten carbide
Weight set materia : Non-Magnatics S.S.
Model 580DX/580HX
Range bar(Kg/cm2) : 1-700/2-1,200
Kpa : 100-70,000/100-120,000
Psi : 10-10,000/10-16,000
Standard accuracy : 0.015% rdg
Class A accuracy : 0.006%/0.007% rdg
Piston unit : Dual range
Piston cylinder : Tungsten carbide
Weight set materia : Non-Magnatics S.S.
Model 580EXH
Range bar(Kg/cm2) : 1-2,600
Mpa : 0.1-260
Psi : 10-40,000
Standard accuracy : 0.002% rdg
Class A accuracy : 0.008% rdg
Piston unit : Dual range
Piston cylinder : Tungsten carbide
Weight set materia : Non-Magnatics S.S.
PNEUMATIC DEAD WEIGHT TESTER
Model 551
Range bar(Kg/cm2) : 15-1000 mbar
Kpa : 1.5-100
Psi : -
in.water : 5-400
mm.water : 150-10,000
Standard accuracy : 0.015% rdg
ClassA accuracy : 0.006% rdg
Piston cylinder : High chrome steel
Weight set material : Non-Magatics S.S.
Model 552/554
Range bar(Kg/cm2) : 0.1-7 bar/0.2-25
Kpa : 10-700/20-2500
Psi : 1-100/3-400
Standard accuracy : 0.015% rdg
ClassA accuracy : 0.006% rdg
Piston cylinder : High chrome steel/Tungsten carbide
Weight set material : Non-Magatics S.S.
Model 556/558
Range bar(Kg/cm2) : 1-70 bar/1-120
Kpa : 100-700/100-12,000
Psi : 10-100/10-1,600
Standard accuracy : 0.02%/0.015% rdg
ClassA accuracy : 0.0065%/0.006% rdg
Piston cylinder : Tungsten carbide
Weight set material : Non-Magatics S.S.
PORTABLE DEAD WEIGHT TESTER
DIFFERENTIAL DEAD WEIGHT TESTER 439 TP
Static Range bar/ (kg/cm2) : 0 to 1,000 mbar
Optional static range extension : 0 to 2,000 mbar
Differential pressure range : 0 to 935mbar (or, 1935mbar)
Standard accuracy : 0.02% Rdg.
Class A acc4racy : 0.008% Rdg
Piston cylinder : Tungsten carbide
Weight set material : Non-Magnetic S.S.
Included : Certificate traceable to National Standard
PORTABLE DWT SERIES 278, 279
Range : 1 to 40 bar up to 70 bar
Accuracy : 0.03% to 0.05 % (std) : 0.008% (class A)
PSI : 10 to 600 bar up to 10,000 bar
Piston unit: Dual (278), Single (279)
Piston cylinder : Tungsten carbide
PNEUMATIC PORTABLE DWT SERIES 439P
Range bar/ (kg/cm2) : 0 to 1,000 mbar
Optional range extension : 0 to 2,000 mbar
Standard accuracy : 0.02% Rdg.
Class A acc4racy : 0.008% Rdg.
Piston cylinder : Tungsten carbide
Weight set material : Non-Magnetic S.S.
Included : Certificate traceable to National Standard
PNEUMATIC AND HYDRAULIC COMPARATORS
HYDRAULIC COMPARATORS SERIES 580C
Generate Pressure : Up to 1200 bar
Media : Oil, Water
Connection : Two union connector
Completed : Tool role and manual
HYDRAULIC COMPARATORS SERIES 106
Generate Pressure : Up to 600 bar
Media : Oil, Water
Connection : For 3/8” and 1/2” BSP, two spanners
Use with most mineral base hydraulic and lubricating oils
PNEUMATIC COMPARATORS SERIES 550C
Generate Pressure : Up to 120 bar
Media : Air, Gas
Connection : Two union connector
Completed : Tool role and manual
DEAD WEIGHT PIPELINE TESTER
PIPELINE DWT SERIES 80, 80L
Range : 7 to 10 bar up to 600 bar
Accuracy : 0.015%
PSI : 100 to 1600(80L), 500 to 8000(80)
Piston unit: Dual (80) ,Single (80L)
Piston cylinder : Tungsten carbide
PIPELINE DWT SERIES 82
Range : 1.5 to 15 bar
Accuracy : 0.015%
PSI : 20 to 200
Piston unit: Single
Piston cylinder : Tungsten carbide
HIGH PRESSURE DWT 283 SERIES
Ranges : 100 to 4000 bar
Standard accuracy : 0.05%
Class A accuracy : 0.02%
Supplied : With PC Software, Certificate traceable to National Standard
Option : UKAS certificate
PORTABLE ELECTRONIC CALIBRATOR
Model H540
Hydraulic range : 0-2600 bar
Accuracy : 0.025%
Pressure unit : Bar, mbar, Kpa, Mpa, PSI, mmHg, kg/cm3, mH2O and user defined
Generate pressure : Hyudraulic screw press
Resolution : 4 to 6 digits
Model P540
Pneumatic range : Vac-100 bar
Accuracy : 0.025%
Pressure unit : Bar, mbar, Kpa, Mpa, PSI, mmHg, kg/cm3, mH2O and user defined
Generate pressure : Gas, hand-pump
Resolution : 4 to 6 digits
Model PPS42
Pneumatic range : Vac-40 bar
Hydraulic range : 0-400 bar
Accuracy : 0.025%
Pressure unit : Bar, mbar, Kpa, Mpa, PSI, mmHg, kg/cm3, mH2O and user defined
Generate pressure : Gas, hand-pump
Resolution : 4 to 6 digits
PRESSURE CONTROL AND PRIMARY STANDARDS
AUTO PRESSURE CONTROLLER MODEL GPC1-3
Accuracy : 0.025 %
Absolute Range : 0 to 10.12 MPa
Gauge Range : -0.1 to 10 MPa
Sensor : Silicon sensor
PNEUMATIC PRESSURE CONTROLLERS LC2
Pressure Range : -1 to 600 bar pneumatic, up to 1400bar hydraulic.
Stability: 0,05% FS.
Accuracy: 0.1% FS.
Achieves required pressure value in 1-3 seconds.
Automatic leakage compensation.
Operation trough manual keypad or communication port.
Option: RS232 Communication Port.
DIGITAL PRIMARY STANDARDS
Ranges : 0 to 50 MPa
Resolution : down to 0,1 Pa
Accuracy : 15 ppm over 3 years.
Self-calibrating with ACF TM
Full automation capability
AUTOMATIC PUMP MODEL PPG52
Range : Vac. to 40 bar (580 ps)i
Accuracy : up to ± 0.01%
Precise pressure control : within ± 0.1 kPa
Included : internal vacuum pump/ internal pressure generator
Option : Electrical inputs
MULTIFUNCTION CALIBRATOR MODEL PPS20, 21
Range : up to 700 barg(10,000 psig) or 20 bar a (300 psi)
Accuracy : 0.025% Fs.
Up to two integral pressure sensor ranges
External pressure sensors.
Twenty-one Standard Pressure units.
Other inputs : mV, mA, V, Pt100.
HART Communications option.
PRESSURE CONTROLLER MODEL MC1
Ranges : 0 to 50 MPa
Resolution : down to 0,1 Pa
Accuracy : 15 ppm over 3 years.
Self-calibrating with ACF TM
Full automation capability
CALIBRATION PRESSURE GAUGE
MODEL 15P, 11/15P SMALL DIAL STANDARD PRESSURE INDUSTRIAL SERVICE GAUGE
Sizes : 63 mm & 80 mm Dial diameter
Range : 0 to 1 Bar, up to 40 Bar Pressure
Equivalent units of pressure / vacuum available Single and dual scales are available
Accuracy : CL:1 1.0% of FSD as defined in EN837-1
Mounting : Direct and Flush
MODEL 15L, 11/15L SMALL DIAL LOW PRESSURE INDUSTRIAL SERVICE GAUGE
Sizes : 63 mm & 80 mm Dial diameter
Range : 0 to 25 mBar, up to 600 mBar Pressure
Equivalent units of pressure / vacuum available Including inches and mm of Water or Mercury
Single and dual scales are available
Accuracy : CL:1 1.0% of FSD as defined in EN837-1
MODEL 950GP OXYGEN PRESSURE GAUGE
Sizes : 63 mm , 100 mm & 150 mm
Range for 63 mm : 0 /1 Bar, up to 600 Bar Pressure
100 mm&150 mm : 0 /400 mBar, up to 1600 Bar Pressure
Equivalent units of pressure / vacuum
Accuracy : 1.0 % FSD (option: 0.5%)
Window : Laminated Safety Glass
Mounting : Direct, Surface or Flush Panel
MODEL: 510 WATERTIGHT PRESSURE GAUGE FOR HIGH VOLTAGE
Sizes: 150 mm (6”)
Range : 0 to 1 Bar up to 0 to 25 Bar Window Dual Scale units or custom scales can be provided
Accuracy : 1.5% of FSD as defined in EN837-1
Window : Acrylic Plastic Window
Mounting: Direct / Surface
MODEL 15H, 11/15H SMALL DIAL HIGH PRESSURE INDUSTRIAL SERVICE GAUGE
Sizes : 63 mm & 80 mm Dial diameter
Range : 0 to 1 Bar, up to 600 Bar Pressure
Equivalent units of pressure / vacuum available Single and dual scales are available
Accuracy : CL:1 1.0% of FSD as defined in EN837-1
Mounting : Direct and Flush
MODEL: 7214 OEM TEST GAUGE
Sizes : 150 mm dial diameter
Range : 0 to 600 mBar up to 0 to 2500 Bar Pressure
Equivalent units of Pressure / Vacuum Available Dual
Scale units or custom scales can be provided
Accuracy : 0.25% of FSD as defined in EN837-1
Window : Laminated Safety Glass
Mounting : Direct, Surface Mounting
MODEL 736 CLASSIC GAUGE
Sizes : 100 mm (4”) & 150 mm (6")
Range : Vacuum to +1 bar up to 1500 bar
Accuracy : CL:1 1.0% of FSD as defined in EN837-1
Mounting : Direct, Surface and Flush
Model 5214 Standard Test Guage
Size : 150mm, 200mm & 250mm
Range : 0 to 600 mBar up to 2500
Accuracy : 0.25% F.S.D
Window : Laminated Safety Glass.
Mounting : Direct, Surface or Flush Panel
Model 5314 Master Test Guage
Size : 250mm (10")
Range : 0 to 600 mBar up to 2500
Accuracy : 0.2% F.S.D
Window : Laminated Safety Glass
Mounting : Direct, Surface or Flush Panel
Model 5414 Super Test Gauge
Size : 250mm (10")
Range : 0 to 600 mBar up to 2500
Accuracy : 0.15% F.S.D
Window : Laminated Safety Glass
Mounting : Direct, Surface or Flush Panel
Model 269 Vacuum Gauge
Size : 63mm
Range : 0 to 30 Inches of Mercury
Accuracy : 1.0% F.S.D
Window : Laminated Safety Glass
Mounting : Direct, Surface or Flush Panel
Model 91/SE Schaffer Diaphragm
Size : 150mm (6")
Range : 0 to 30 mBar up to 70 bar
Accuracy : 1.0% F.S.D
Window : Laminated Safety Glass
Mounting : Direct, Surface or Flush Panel
Model 5219FZGP Testing Machine Gauge
Size : 150mm, 200mm and 250mm
Range : 0 to 1 Bar up to 800 bar
Accuracy : 0.5% F.S.D
Window : Laminated Safety Glass
Mounting : Direct, Surface or Flush Panel
Model 179 F Differential Bourdon Type
Size : 150mm
Range : 0 to 1 Bar up to 16 bar
Accuracy : 1.5% F.S.D
Mounting : Surface or Flush Panel
Model M24 Differential Bellow Type
Size : 100mm (4"), 150mm (6")
Range : 75 mBar up to 70 bar
Accuracy : 0.75% F.S.D upto 1.5% F.S.D
Mounting : Direct, Surface or Flush Panel
Model Dxi Test Gauge
Size : 86mm (3.4")
Range : Vacuum to +7 bar up to 700 bar
Accuracy : 0.1% on pressure, 0.25% on vacuum
Mounting : Direct
Contact
Kinetics Corporation Ltd. (TIB)
388 Ratchadapisek Road, Chandrakasem,
Chatuchak, Bangkok 10900 Thailand.
Tel : 662-515-8951
Fax : 662-515-8988
E-mail : tib@kinetics.co.th
Website : www.kinetics.co.th
